What factors may cause the Fuel Sightseeing Car controller to fail?
2024,11,15
For
Fuel Sightseeing Car controllers, the motor and power supply are important components of the vehicle. The controller is the "brain" of the Fuel Sightseeing Car. It controls various components to work in an orderly manner. So when the Fuel Sightseeing Car controller is damaged, the entire Fuel Sightseeing Car will not be able to work normally. Now let's share the factors that may cause
Sightseeing Bus controller failure:
1. Damage to the power unit, caused by damage to the motor; the power supply equipment itself is of poor quality or insufficient selection, the equipment is installed or vibrated loose, causing motor overload, power supply equipment drive circuit damage or unreasonable parameter design.
2. The internal power supply of the controller is damaged, the internal circuit of the controller is short-circuited, the peripheral control components are short-circuited, and the external leads are short-circuited.
3. When the controller works intermittently, the device itself drifts in a high or low temperature environment, and the overall design power consumption of the controller causes the local temperature of some devices to be too high, causing the device itself to enter a protection state and poor contact.
4. Loss of control signal caused by wear of the connecting wire and failure or loss of the connector, unreasonable wire selection, incomplete protection of the wire, and loose crimping of the connector.